ASM CPP placement head

The ASM CPP (MultiStar CPP) is the core multi-functional placement head of the ASM (formerly Siemens) SIPLACE series pick-and-place machines. It supports mixed C&P (Collect & Place) and P&P (Pick & Place) modes, and is suitable for components from 01005 to 50×40×11.5mm. It features a 12-segment star layout, independent vacuum and DP drive, and a placement accuracy of ±25µm@3σ.

Full Name and Positioning: CPP = Collect & Place / Pick & Place, a multi-functional placement head (not a pure high-speed head), commonly used in SIPLACE TX2i, SX2, and other models; CP20 is the pure high-speed head (20 nozzles).

Component Coverage: 01005 (0.4×0.2mm) to large-size components (≤50×40mm, height ≤11.5mm), supporting irregularly shaped components (requires P&P mode).

Structural Features: 12 independent positioners (star-shaped arrangement), each with an independent vacuum generator, DP rotary motor, and integrated downward-facing camera, enabling high-speed, pre-alignment-free placement.

Typical Applications: High-mix, small-batch PCBs (e.g., automotive electronics, industrial control boards), accommodating both high-speed placement of micro-components and high-precision placement of medium to large-sized components.

Important Notes: CPP ≠ CP20 (the latter is a pure high-speed head with no P&P capability); also not "TwinStar" (used for oversized irregularly shaped components).

Accessories Reference: Common models such as CPP, CPPM, MultiStar CPP; nozzles/adapters (e.g., 03011583) must be compatible with specific models (TX/SX/V series).